Lay fabric ( i used ticking) over heavy tear
away stabilizer. Sew the bunting outline. Lay the fabric for the heart
in place and sew the first heart outline.
Gently place some fiberfill
or your choice of stuffing in the partly sewn heart. Do not over
fill or your needle will have trouble sewing, and it will appear at
the edge of the heart.
Sew second heart running stitch and trim.
Sew satin stitch outline.
Place matching fabric on the
back of the hoop and tape in place.
Sew front details.
in order to separate the steps, different colours of thread are
shown in the design, but I used the same colour all the way through.
The back should look like
Pop from the hoop, tear away
the stabilizer and trim with pinking sheers. I used an exacto knife
to cut the eylets. Thread with ribbon. Either fasten each flag with
a bow, or thread all the way through.